New Product: Solutions from Precision Plumbing Products

Now Stocking Trap Primer Valves and Water Hammer Arrestors from Precision Plumbing Products

 

Precision Plumbing Products, Inc. offers a large quantity of high-quality plumbing products, and we are proud to carry a selection of their trap primers and water hammer arrestors to meet your plumbing needs.

 

Available at Porter Pipe:

 

P1-500 – P-1 TRAP PRIMER VALVE

  • Precision device designed to deliver potable water for 1-4 floor drains
  • Pressure drop of 10 psig (70 kPa) required to activate
  • Must be installed on cold fresh water lines of 1 1/2″ diameter or less
  • 20 to 80 psig (138 to 552 kPa) operating range

 

PR-500 – PRIME-RITE SERIES TRAP PRIMER VALVE

  • Will prime up to two floor drains with patented distribution DU-U and DU-4 units
  • 20 psi minimum to 80 psi maximum (138 to 552 kPa) system operating range
  • Requires a 10 psi (70 kPa) pressure drop across valve to activate
  • Delivers a metered amount of water to floor drain
  • To be connected to a cold water supply only
  • Constructed of 360 brass, EPDM E70 O-rings, Dow #7 Silicone, #60 stainless steel mesh screen

 

P2-500 – P-2 TRAP PRIMER VALVE

  • Precision device designed to deliver potable water for 1-2 floor drains
  • A pressure drop of 10 psig (70 kPa) required to activate
  • Must be installed on cold fresh water lines of 1 1/2″ diameter or less
  • 20 to 80 psig (138 to 552 kPa) operating range

 

PRO1-500 – PRIME-PROTM TRAP PRIMER VALVE

  • Activated when sensing potable water flowing at an adjacent plumbing fixture
  • Must be installed on the cold water line leading to the plumbing fixture
  • Emits fresh, cold, potable water to a floor drain trap when fixture is in use, providing an adequate trap seal
  • Equipped with vacuum breaker ports and internal back-flow protection to prevent cross connection
  • Factory pre-set and 100% function tested
  • Designed for 1-4 floor drain trap seal applications
  • Activated at a minimum flow rate of 0.25 GPM at 20 psig
  • Third party tested and meets the requirements of ASSE Standard 1018

 

DU-U – FLOOR DRAIN TRAP PRIMER FRESH WATER DISTRIBUTION SYSTEM

  • Patented designs that incorporate both copper and PVC materials
  • Provides installer with simple and positive means to prime multiple floor drains using only one Precision Plumbing Trap Priming Valve
  • Features a PVC Body
  • 4 – 3/8″ FPT Brass Discharge Fittings
  • 1/2″ Male NPT Composite Inlet
  • Comes with two plugs

 

MP-500-115V – MINI-PRIME ELECTRONIC TRAP PRIMER

  • Designed for use with 1-4 floor drains
  • 220 Volts, 115 Volts or 24 Volts
  • 1/2″ FNPT Connection
  • Contractor need only wire and connect to Energy Management System
  • Distribution units purchased separately

 

MPB-500-115V – MINI-PRIME ELECTRONIC TRAP PRIMER WITH BOX

  • Designed for use with 1-4 floor drains
  • 220, 115 or 24 Volts
  • 1/2″ FNPT Connection
  • Distribution units purchased separately

 

SC-500 AND SC-750 – SYSTEM RATED PLUS ARRESTORS – THREADED

  • 1/2″ and 3/4″ available
  • Maintenance-free installation
  • Free-moving piston furnished with “O” ring seals
  • Tested for reliability in excess of normal operating ranges
  • Lead-free
  • Only one moving part
  • Commercial, industrial and residential use
  • No access panel required

 

Call today to place an order or order online via our Storefront.

 



Share:

Facebook
LinkedIn
Twitter
Google+
https://www.porterpipe.com/new-product-solutions-from-precision-plumbing-products">